You are here:Home > AAC Block/Brick Machine
Picture Introduction
1.Jaw Crusher is important part of AAC Block Making Machine,it is used for crushing limestone.It is made of frame,moving jaw,eccentric shaft,jaw board,scale board.
2.Eccentric shaft is drove by motor through V-belt.It makes moving jaw to move at settled rail to crush object inside cavity.Frame is one body cast from melted iron.Scale boards is fixed inside to protect frame.Moving jaw is casting steel and one steel board is fixed on its front.Top of moving jaw is fixed on frame through eccentric shaft and ball bearing.Down is fixed on scale board.It touches scale board in rolling contact.Scale board support moving jaw.When some uncrushable object come into cavity.It breaks quickly to protect others parts.The adjustable socket is fixed in spout at two sides of frame.It is in contact with wedge.When discharge gate needs adjustment,you can use one spanner to make nut to right side,the wedge goes up.The socket moves to forward.The discharging gate become from big to small.Otherwise it become from small to big.
3.AAC Block Making Machine of our company uses PE200X350 Jaw crusher,its specifications as following:
ModelPE200-350 Feed Charge  size mm 200x350 Maxi.size of Stonemm 180 Discharge door sizemm 18-70
Productiont/h) 3-10 Eccentric shaft Speedr/min 260 Powerkw 11
Weightt 1.3 Machine sizeL*W*H 1000*870*990